Micca EP600 G2 Owner's Manual download pdf (Page 44)

9.1.13 Clear All Media Library

Clears the media library database for all attached storage devices. Use this to fix corrupted

media library database features. After clearing the database, generate the database again by

following the directions in ‘6.1 Media Library – Setup’.

In rare cases, clearing the media library database is not enough to fix corrupted database

errors. In this case, the database must be manually deleted using a computer. To do so, attach

the storage device to a computer and delete the “.Theatter” folder and “.Part” file from the root

folder of the storage device.

9.1.14 Run Android at bootup

This setting configures whether the Android component of the firmware will be loaded when the

player powers up. Since the Android component takes up additional system resources, always

change this settings to Off when not planning to use the Android feature.

Setting

Description

The Android component will be enabled. After the player starts up, an

Android icon will be available for selection form the main menu.

Off

The Android component will not be enabled.

9.1.15 Factory Default

Resets settings back to factory default. Certain settings and configurations cannot be reset

through this setting. Perform a firmware update using the recovery method to completely reset

all settings. Please see ‘9.6.3 USB Upgrade’ for more information on performing firmware

updates.

9.2 Audio Settings

The audio settings menu contains configuration items for the player’s audio outputs.

9.2.1 Night Mode

When turned on, night mode compresses the dynamic range of audio output by the player. This

allows the quiet sounds of a movie to be more clearly heard while lowering the volume of loud

sounds so as not to bother other people in the home.

9.2.2 HDMI Output

HDMI Output sets the format of the digital audio carried over the player’s HDMI output.

Setting

Description

Auto

The player will automatically detect the audio formats supported by the

TV or home theater receiver it is connected to. The player will

automatically use either LPCM or RAW as appropriate depending on

source material.

LPCM

Audio is decoded by the player and down-mixed into two channels for

output over HDMI. Use this setting if the TV or home theater receiver

lacks multi-channel audio decoding capabilities.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 55 56

No comments

Micca EP600 G2 Owner's Manual Page 44